SKF cylindrical roller bearing

The cylindrical roller and raceway are linear contact bearings. Large load capacity, mainly bearing radial load. The friction between the rolling element and the retaining edge of the ferrule is small, which is suitable for high-speed rotation. According to whether the ferrule has retaining edge or not, it can be divided into single row cylindrical roller bearings such as Nu, NJ, NUP, N and NF, and double row cylindrical roller bearings such as NNU and NN. The bearing is a separable structure of inner ring and outer ring.
Cylindrical roller bearing with inner ring or outer ring without retaining edge, whose inner ring and outer ring can move relatively axially, can be used as free end bearing. A cylindrical roller bearing with double retaining edges on one side of the inner ring and the outer ring and a single retaining edge on the other side can bear a certain degree of axial load in one direction. Generally, steel plate stamping cage or solid cage made of copper alloy are used. However, some use polyamide shaped cages.
characteristic
1. The roller and raceway are in line contact or repair line contact, with large radial bearing capacity, which is suitable for bearing heavy load and impact load.
2. Low friction coefficient, suitable for high speed, and the limit speed is close to the deep groove ball bearing.
3. N-type and nu type can move axially, can adapt to the change of the relative position between the shaft and the shell caused by thermal expansion or installation error, and can be used as free end support.
4. The processing requirements for the shaft or seat hole are high. After the bearing is installed, the relative deflection of the outer ring axis should be strictly controlled to avoid contact stress concentration.
5. The inner ring or outer ring can be separated to facilitate installation and disassembly